Skip to main content

Browse Projects, find Products,connect with Professionals.

Become a Pro

Fence & Gate Repairs

Contractors handle fence & gate repairs at commercial sites, including fence post repairs and electric gate repairs.

Can't find it? Describe what you need and matching suppliers will come to you.

Fencing & Gates
  • Fence & Gate Repairs

Fence & Gate Repairs

Nothing matches those filters

Try widening one of them, or start again with the whole category.

Clear filters

Learn about Fence & Gate Repairs

Planning fence and gate repairs starts with identifying why a fence has shifted or a gate no longer closes squarely. A loose post can pull adjoining panels out of alignment, so fence post repairs should address the support as well as the visible damage. Local frost depth and soil conditions in the United States affect how replacement posts and footings should be installed; a contractor can assess whether movement began below ground.

Fence & Gate Repairs

Electric gate repairs require attention to the gate's physical condition as well as its operator. Binding hinges or a damaged track can interfere with travel, while a control fault may prevent an otherwise sound gate from opening. Testing should include the safety devices that detect obstructions, rather than stopping once the motor runs. The repair scope for a homeowner or property manager should distinguish work on the gate itself from work on its power supply and controls.

When does a fence need replacement rather than repair?

Ask the contractor to compare the condition of the damaged section with the rest of the fence. Widespread rot or corrosion may make an isolated repair impractical, even if only one section has fallen.

Do fence repairs require a permit?

Permit requirements depend on the local jurisdiction and the scope of work. Check with the building department before changing the fence height or location, and confirm the property line before moving posts.

How should access be managed while an electric gate is out of service?

Arrange an alternate entrance if the gate cannot operate safely. Have the contractor explain the manufacturer's manual-release procedure and how to secure the gate during the repair.